Nortel

[b]Pre-req; Configure Network Adapter Teaming on the servers.[/b]

[b] [/b]

[b]2. [/b][b]Define a trunk group on the GbESM.[/b]

[b]3. [/b][b]Configure Failover parameters.[/b]

4. [b]Apply and verify the configuration[/b].

[b]5. [/b][b]Save your new configuration changes.[/b]

>> # [b]/cfg/l2/trunk 1 [/b][i](Select trunk group 1)[/i]

>> Trunk group 1# [b]add EXT1 [/b][i](Add port EXT1 to trunk group 1)[/i]

>> Trunk group 1# [b]add EXT2 [/b][i](Add port EXT2 to trunk group 1)[/i]

>> Trunk group 1# [b]add EXT3 [/b][i](Add port EXT3 to trunk group 1)[/i]

>> Trunk group 1# [b]add EXT4 [/b][i](Add port EXT4 to trunk group 1)[/i]

>> Trunk group 1# [b]ena [/b][i](Enable trunk group 1)[/i]

>> # [b]/cfg/failovr/on [/b][i](Turn Failover on)[/i]

>> Failover# [b]trigger 1 [/b][i](Select trigger group 1)[/i]

>> Trigger 1# [b]ena [/b][i](Enable trigger group 1)[/i]

>> Trigger 1# [b]limit 2 [/b][i](Set Failover limit to 2 links)[/i]

>> Trigger 1# [b]amon [/b][i](Select Auto Monitor menu)[/i]

>> Auto Monitor# [b]addtrnk 1 [/b][i](Add trunk group 1)[/i]

>> Auto Monitor# [b]apply [/b][i](Make your changes active)[/i]

>> Auto Monitor# [b]cur [/b][i](View current trunking configuration)[/i]

>> Auto Monitor# [b]save [/b][i](Save for restore after reboot)[/i]

ref; http://www-304.ibm.com/jct01004c/sy...nd=5000020