Main Screen - Initial Program Startup

Import Wizard - Step 1

Import Wizard - Step 2

Import Wizard - Step 3
Select Physical Computer

Import Wizard - Step 4
Select "This Local Machine"

Import Wizard - Step 5a
Select the disks you want imported from the physical machine

Import Wizard - Step 5b
This is where you can resize the Hard Disk for the Virtual Machine

Import Wizard - Step 5c
This shows the disk resize info

Import Wizard - Step 6

Import Wizard - Step 7
Select "VMware ESX Server" option here.

Import Wizard - Step 8a
Input ESX IP, username and password for the import operation here

Import Wizard - Step 8b

Import Wizard - Step 9
Input a name for the virtual machine (this is the name that shows in the Virtual Infrastructure Client)

Import Wizard - Step 10
Select the ESX Host and Optionally a Resource Pool for the Virtual Machine

Import Wizard - Step 11
Select the Datastore on the ESX server to put the virtual disk image

Import Wizard - Step 12

Import Wizard - Step 13
Choose the type of networking to use for the Virtual Machine (typically start with bridged mode and modify later)

Import Wizard - Step 14
Check the "Install VMware Tools" option ONLY

Import Wizard - Step 15
Review Settings and Finish (Don't Choose the "Power on the new Virtual Machine" Option)

Main Screen - Task Progress
This shows the progress of the Import Operation
Once the task completes, power down the physical machine, and power on the Virtual Machine

Once your conversion is complete, you can then set the Virtual Machine to use the correct IP after it has booted.